Plastic Profile Extrusion Line
0102030405
PVC PP PE PC ABS PMMA Small Profile Extrusion Line
PRODUCT video
Production Process
Raw material → Single-screw extruder →Extrusion mould →Vacuum calibration table → Haul-off → Cutter→ Stacker → Finished product inspecting & packing
Machine Characteristics
This PC pipe extrusion line is used for producing PC/PMMA transparent, semi-transparent lampshade, PC-LED energy-saving lamp chimney and fluorescent tube profile etc. The products are widely used in the fields of illumination and decoration. The main raw material is PS and engineering plastic (PC/PMMA) etc.
The production line includes high efficiency single screw extruder, calibration table, haul off, precise cutter, the screw and barrel adopts Japan technology is designed for PC/PMMA material. The profile calibrator made from imported steel and by precise processing, ensures the precise and stable size of the profile, the ball screw cutting type ensures the cutting precision +/-1.0mmPRODUCT PARAMETER
Model |
YF108 |
YF108 |
YF180 |
YF240 |
YF300 |
Product width(mm) |
108 |
108 |
180 |
240 |
300 |
Extruder model |
JWS45 |
JWS50 |
JWS65 |
JWS90 |
JWS120 |
power(kw) |
15/11 |
22/18.5 |
30/22 |
55/45 |
90/75 |
Cooling water(m3/h) |
4 |
4 |
5 |
7 |
7 |
PRODUCT application
Adopting a special screw design and different configurations, it is suitable for the regeneration and granulation of various plastics such as PP, PE, PS, ABS, PC, etc. The gearbox adopts a high torque design, achieving low noise and smooth operation. The screw and barrel undergo special surface treatment, which has the characteristics of wear resistance, good mixing effect, and high yield. The design of vacuum exhaust or natural exhaust port can eliminate moisture and waste gas during the production process, making the discharge more stable and the particles denser, ensuring the excellent quality of the product
Extruder
Famous brand main motor, imported inverter and accurate electrical components.
High precision and wear-resisting gearbox, high efficiency transmission, long service life.
Optimal vacuum and temperature control systems guarantee good product quality and stable production.
The equipment layout is based on Jwell's 26 years of extruder production experience. The equipment layout is reasonable and compact. The equipment has the advantages of high stability, large output, energy saving, intelligence, and long life.
Calibration Unit
The flow of water and gas can be precisely controlled, perfect coordination of molding products.
Could be moved by motor or by hand.
Haul Off
Two tractors driven by independent two motors.
Speed controlled by imported imported inverter.
Cutter
Accurate cutting length controlled by computer system.
Smooth cutting surface.
Manual cutting and automatic cutting choice.
